Room Temperature Vulcanizing
Injection Molding
Systems
Room Temperature Vulcanizing
Injection Molding
Systems
EnDiSys has the room temperature vulcanization (RTV) equipment solutions.
Typically the equipment is used for casting or mold-making RTV Silicone(or other materials) a two-component material made by mixing the silicone rubber with a curing agent or vulcanizing agent, these products are known for their durability under mechanical and thermal stress.
We provide service and training on all of our equipment as well as carry the necessary accessories for all your RTV needs.
The Model 201, 201H & 201B Machines
Two-Component RTV System
Silicone Injection Molding
Designed for 10:1 variable ratio dispense for Room Temperature Vulcanization (RTV) Silicone or other RTV materials. Select from a range of different accessories to customize the system for your production environment.
All Model 201 systems have a third stream option that allows from 1% to 5% additive for a variety of injectable options, a solvent flush system that minimizes waste by flushing only the resin material and low base level and high-pressure switches to prevent pump runaway.
The 201(Direct-from-resin-drum) RTV systems were created to enhance, reduce cost, and hasten the process of making prototypes and molds for smaller production jobs.
The Model 201, 201H & 201B are ideal solutions for manufacturing projects in the following industries:
RTV Injection Molding for Rapid Prototyping RTV Injection Molding for Mold Making
Model 201, 201H & 201B Common Features
8 inch air cylinder
Low level and low pressure indicators
Adjustable catalyst
Gravity fed catalyst tanks
Direct from drum resin feed
Model 201 Added Features
1 inch O.D. static mixer
Solvent flush system
¾ inch ball valve outlet
Model 201B Added Features
1 inch O.D. static mixer
Base purge system
½ inch ball valve outlet
Model 201H Added Features
SG225 Gun with disposable static mixers
Accessories
Catalyst agitator
Additional third stream metering - For oils and pigments
SK530 - Cataylst feed tank agitator
SG225 - Hand gun assembly with disposable static mixers
B240 - Industrial metering pump
Specifications
Viscosity Range: 20,000 to 200,000 centipoise (cps)
Flow Rate (Model 201): Up to 8 lb/min of 100,000 cps mix;
up to 15 lb/min of 20,000 cps mix
Flow Rate (Model 201H w/ SG 225 Handgun): 2 to 4 lb/min
Maximum Output Pressure: 3,000 PSI
Ratio Range: 7:1 to 15:1 by volume
Air Requirement: 10 cfm @ 100 psi
Power Requirement: 120 vac / 50-60 cycle / single phase
Electrical Current Requirement: 3 amps
Weight: 700 lbs
Height Requirement (extended): 107 inch (272 cm)
Height Requirement (retracted): 70 inch (178 cm)
The Model 201G-LR, 201GH-LR & 201GB-LR & 201G3-LR Machines
Two-Component RTV System
Silicone Injection Molding
Designed for 10:1 variable ratio dispense for Room Temperature Vulcanization (RTV) Silicone or other RTV materials. Select from a range of different accessories to customize the system for your production environment.
All Model 201 systems have a third stream option that allows from 1% to 5% additive for a variety of injectable options, a solvent flush system that minimizes waste by flushing only the resin material and low base level and high-pressure switches to prevent pump runaway.
The 201-G(Gravity Fed) RTV systems were created to enhance, reduce cost, and hasten the process of making prototypes and molds for larger production jobs.
The Model 201G-LR, 201GH-LR, 201G-LR & 201G3-LR are ideal solutions for manufacturing in the following industries:
RTV Injection Molding for Rapid Prototyping RTV Injection Molding for Mold Making
Model 201G-LR, 201GH-LR & 201GB-LR & 201G3-LR Common Features
8 inch air cylinder
Low level and low pressure indicators
Adjustable catalyst
Model 201G-LR Added Features
Gravity fed resin and catalyst tanks
6 ft outlet hose
1 inch O.D. static mixer
Solvent flush system*
¾ inch ball valve outlet
Model 201GB-LR Added Features
This model has the same features as 201G-LR, except it offers a base purge system in place of the solvent flush.
Model 201G3-LR Added Features
This model has the same features as Model 201G-LR, plus it offers a 3rd stream slave pump.
Model 201GH-LR Added Features
Gravity fed base and catalyst tanks
10 ft A and B hoses with portable gun
SG225 Dispensing gun
Disposable static mixers
No solvent flushing required
Accessories
SK530 - Cataylst feed tank agitator
SG225 - Hand gun assembly with disposable static mixers
B240 - Industrial metering pump
Specifications
Viscosity Range: 20,000 to 200,000 centipoise (cps)
Flow Rate: Up to 8 lb/min of 100,000 cps mix;
up to 15 lb/min of 20,000 cps mix
Maximum Output Pressure: 3,000 PSI
Ratio Range: 7:1 to 15:1 by volume
Air Requirement: 10 cfm @ 100 psi
Power Requirement: 120 vac / 50-60 cycle / single phase
Electrical Current Requirement: 3 amps
Weight: 1000 lbs
Height Requirement: 75 inch (190 cm)
Main Office: 14329 Northdale
Blvd. Rogers, MN 55374
Phone: (763) 428-5075
Illinois Office: 120 Industrial
Drive Gilberts, IL 60136
Phone: (847) 400-4615
Ohio Office: 2962 Township
RD 97 McComb, OH 45858
Phone: (763) 286-4821